Fireplace Mantel

The Step-by-Step Guide to Build a Fireplace Mantel at Home?

Want to learn how to build DIY Fireplace Mantel and surround yourself with stock lumber and moldings?

Well, although there’s no shortage of pre-made mantels on the market. You can buy oak mental from the market or from any online store. But, for the people who are builders at heart. Here is a guide to teach you how to build a DIY fireplace mantel from off-the-shelf lumber.

Here is a traditional-looking design that will go with many types of décor. But before learning how to build a fireplace mentally. Let’s talk about what is the best wood to make a fireplace mantel?

·  The fireplace mantels are made of ¾-inch veneer plywood which is layered with the elegant pilasters and wrapped with stock moldings and baseboard. These fireplace mantels are also topped with a trimmed-out shelf.

However, with any fireplace project, safety is of top-most importance. Therefore, the national codes require at least 6 inches of clearance all around the firebox along with an additional 1 inch for every ⅛ inch a mantel protrudes from the surface.

Well, a cardboard template can also help you to determine whether a mantel is of the right size and scale or not as per your space. Hence, create or buy oak mantels and install them soon. And, you’ll love how they will frame your favorite gathering spot.

 Now let’s learn, how to build a fireplace mantel –

· Step 1: Measure Your Space –

The very first step of creating a wood mantel at home is to measure your space. And for that, you need to seize the mantel to fit your fireplace while choosing the moldings and trimming that mimic nearby profiles.

· Step 2: Cut the Pieces –

In the next step, you’re required to cut the pieces such as the shelf, the breast, the legs, the returns, and the nailing strips to size.

 · Step 3: Assemble the Mantel –

In the 3rd step, you will be attaching the legs to the breast by screwing the plywood cleats across their back seams. However, you’re required to screw the nailing strips to the back of the assembly which will be at ¾ inch distance from each outer edge.

Then, you will set the returns against the strips while flushing with the outer edges and securing them with screws.

 · Step 4: Cut the Trim and Add to Centered Pilasters –

The next step will be nailing the centered pilasters to each leg. Here, you will need to install a nailing block on each of the pilaster flushes with the top edge of each. For nailing it, you will start with baseboard at the bottom and then you’ll add crown molding at the top. After that, you’re required to add an astragal molding below the crown molding and at the bottom of the breast. And finally, miter and nail the doorstop to the mantel’s interior edges for finishing the return to the surround.

· Step 5: Attach the Shelf –

In the last step, you need to trim the shelf by mitering and nailing the shoe molding to its edges. So, here you will nail through the top of the shelf into the mantel while filling all the fastener holes before sanding and finishing the entire piece.

Leave a Reply