best angle grinder

How to Choose the correct angle grinder

Tips for choosing the best-corded angle grinder

Size and performance are the essential factors in determining which angle grinder is best for the job.

It’s all about the right size wheel for the job at hand, whether you’re cutting, grinding, or polishing something.

It’s up to the wheel to execute its job once it comes into contact with the material.

Grinder power is inversely proportional to the time it takes to grind welds or cut steel plates with an underpowered machine.

As a result, it’s all about convenience and additional features.

Cutting the wire and using battery power is the most convenient option.

Electric angle grinders can’t match the performance of cordless grinders, especially in larger sizes.

The trade-off is acceptable in exchange for a more excellent price and a short runtime.

On the other hand, Cordless grinders have some features that aren’t available on corded models.

Consider the following features as well:

  • Electronic braking.
  • Automatic shutoff of kickback
  • a new generation of vibration control
  • Masonry/concrete shrouds that function well together.
  • Motors with no brushes (on cordless and corded models)
  • Intuitive controls and tracking
  • In total, there are three places to attach the side handles.
  • See how cordless technology is affecting the way angle grinders are used here. 

Tips for safe use of an angle grinder

Angle grinders may reach speeds over 10,000 RPM.

Shrapnel can fly into your face and body, injuring onlookers or ruining your equipment if something goes awry on the business end.

To avoid this, here are some safety recommendations for using an angle grinder

  • There are no excuses for not wearing eye protection!
  • Wearing a metalworking apron is one option.
  • Cut-resistant gloves should be worn.
  • Always have a guard in place when you’re working.
  • When you have the option, use a brake grinder.
  • Consider purchasing a grinder that allows you to regulate the amount of kickback it produces.
  • Consider using a paddle switch instead of a standard on/off switch.
  • Set the grinder down only once the wheel has stopped spinning.



How do you use an angle grinder to cut metal?

Cut through lead, iron, copper, and other metals easily with an angle grinder and a metal cutting disc. Grinding generates a large number of sparks, so it’s crucial to protect your eyes and hands by wearing safety goggles and gloves. 

How do you use an angle grinder to cut pavers?

Paving stones can be easily cut with an angle grinder fitted with masonry discs. Work on a workbench with the paver marked and positioned where you wish to cut. Activate the grinder and begin slicing into the paving stone. Getting a clean cut through the paver is much easier once you’ve started the cut. 

I have vise grips, but I’m unsure how to remove the disc.

With the help of an accompanying spanner, you may tighten or loosen the nut that secures the grinding discs. A set of vise grips can still be used to remove the nut if the spanner is lost. Using a screwdriver or your hand, loosen the locking nut on the grinder’s blade, then remove the vice. 

How do you properly recycle an old angle grinder?

Instead of tossing your old angle grinder in the trash, please take it to a local electronics recycling location. Typically, the municipality or town will have a program for recycling electronic tools and other devices, though some home improvement stores, like Home Depot, also offer tool recycling programs.

How do you dispose of an old angle grinder responsibly?

Take your old angle grinder to a local electronics recycling center instead of throwing it away. Some home improvement businesses, like Home Depot, have recycling programs for electronic products. 

Leave a Reply